ANEST IWATA Italia S.r.l.

Via dell Industria, 21, 10023 Chieri

Tel: +39 (0) 11 24 80 868

Fax: +39 (0) 11 85 19 44

Email: commerciale@anest-iwata-it.com

FAQ

Anest Iwata have more than 90 years of experience in the coating equipment in providing spray guns with the most advanced atomization technology, the Split Nozzle™, that comes from an attentive Japanese craftmanship in combination with a pioneer mind and that is part of the innovative Anest Iwata experience.
You can find your closest Anest Iwata dealer by contacting one of our subsidiaries in your country. You can know which subsidiary is the closest to you by putting your zip code in our subsidiary finder.
You can ask your Anest Iwata dealer or contact your closest subsidiary. You can find the latter by putting your zip code in our subsidiary finder.
To choose a spray gun for your application you can start by using our filtering option in the product section.
The second step is to ask your closest Anest Iwata dealer for suggestions concerning the right model and set-up of your spray gun.
You can buy your spare parts from your Anest Iwata dealer. To find out which is the spare part you need you can use our Spare Parts Finder.
Yes! In addition to manual spray guns for car refinishing we also provide a wide range of automatic spray guns, pumps or other accessories for the Industry usage. You can go through them by using the filtering option to select the area of application you are interested in.
Our spray guns are developed to offer a variety of adjustments in order to perform well, under several environmental conditions and paint viscosities.
In order to adjust the spray pattern properly you can follow this checklist here below:

1. Make sure you apply the correct pressure
2. Adjust the fan patter with the spray gun tester
3. Adjust the spraying distance with the spraying procedure written in the manual
4. If this is still not working properly contact your Anest Iwata dealer
To adjust your spray gun, you can go through the check list here below:

1. Clean inspection: Is it done properly? Please check the status of the needle and nozzle and eventual air cap clogging of holes
2. Technical check: check the air pressure and try to re-adjust the fan pattern.
3. Make sure that needle and nozzle and air cap, show no signs of damage.
4. If the performance remains insufficient please contact your Anest Iwata dealer

Show all